How to Fixed Slow Wi-Fi Problem
Many people have experienced WiFi Slow when connecting to the Internet at home. It is customary to blame internet service providers as soon as Wi-Fi slows down.
How to solve wifi problem
Router
But the Internet router, the router's settings, the router's location, etc. may also be slow.
Do a speed test
First, test your home internet speed - not over Wi-Fi, and directly on the router. Contact your service provider if your speed is less than what your service provider promised when doing a wire test. This problem is caused by the service provider
Speed test when connecting wires shows fast, but if Wi-Fi is slow, you need to change the router's settings and location, or the router itself.
The right place to put the router
It may sound strange, but the location of the router can also greatly affect the speed the router can provide.
In which place should a router not be installed?
- The router should never be placed around any other electrical device (such as a refrigerator, TV, microwave). Other electrical devices block the router's signal, causing the Internet to slow down.
- The router should not be placed under a corner, table and stand. The router's signal in the corner does not transmit properly and the Internet is slow.
- The router should not be restrained with a plastic bag or other item. Without good ventilation, the router's temperature rises and slows down.
What kind of router to put in place?
- The router should be kept open. To the extent possible, the router should be positioned so that it can be viewed directly from most locations in the home.
- Devices and routers such as refrigerator, TV, microwave and spacer should be at least 3-5 meters apart.
- If there is a large house, it is advisable to place the router in the middle of the floor.
Router settings
Most users use the router without having to change its settings. In most cases, it does not matter and the Internet works well. But in some cases the Internet may be slow due to this setting.
Hit 192.169.0.1 or 192.168.1.1 in the browser to open the router's setup page. Grab the username and password you need If unchanged, both the default username and password will be admin .
Router's channel
The router sends the Internet signal through some specified channels. Such interference will be less if you run your router from the nearest router to the least used channel. Download the app called WiFi Analyzer available on the Playstore, App Store and Windows 7 Store. This app will recommend the channel most suitable for the router in your area. Open the router's setup page and follow the recommended channels here.
Hit 192.169.0.1 or 192.168.1.1 in the browser to open the router's setup page. After you lose the required username and password, go to Wireless Settings of the router. At this point you will find the option to change the channel. Almost all of them are already auto-selected in that setting. Change this setting to the channel recommended by the WiFi Analyzer app instead of Auto and restart the router.
Router interval
Beacon Interval is a bit more complicated. On most routers, the result can be from 1 to 1000.
Hit 192.169.0.1 or 192.168.1.1 in the browser and open the router's setup page. After going to Advanced wireless settings, you will find the option called Beacon Interval. This setting may already have 100 ms. Make it about 500 and restart the router. Not good? Reduce or increase the beacon interval again and test again. Keep what works best. The beacon interval is a bit more complicated. For general household sponsorships it is advisable to keep 991. Having a small beacon interval reduces the battery of the mobile running WiFi. So it's best to keep a little more.
Channel width 20 MHz or 40 MHz?
New routers can work on two Channel Width - 20 MHz or 40 MHz Browser 192.169.0.1 or 192.168.1.1 after opening the router's setup page, there you can select Channel with 20 MHz or 40 MHz in wireless settings.
Range of 20 MHz is high but speed is low and interference is high. Speed is higher at 40 MHz and interference is low but range is also less. If the house is large and you have not used the repeater then it is advisable to use 20 MHz only. Repeater is used and 40 MHz is appropriate if WiFi is only used in small areas. It is not advisable to use 40 MHz in a large walled house and low open area.
DNS change
If internet browsing is slow, DNS can be changed for improvement. The change in DNS is almost certain to improve the internet speed. The most current and fastest-growing DNS 1.1.1.1. Go to the router's setup page and hit 1.1.1.1 on the DNS and restart the router.
Router protection
WiFi slows down even if the router is hacked. Someone else is stealing your Internet and may be slow. To protect the router, consider the following:
1. Go to the router's settings page and turn off the WPS option,
2. Keep password ali long and complicated
3. Always set the password in WPA2 mode
4. Filter the MAC if necessary .
Is the router very old?
The newer routers are much faster than the old ones and they have new features. Some older routers do not have to change the settings described above. For a better Internet experience, your router must be at least 802.11n or 802.11ac. Routers with 802.11b and 802.11g levels are outdated. So it's best not to use him.
After prolonged use, dust may also be frozen on the router. Clean up If you are buying a new router, buy as many as two antennas and have 802.11ac levels.
If the internet is slow enough to do so, contact the service provider.
How to solve solw internet problem. World link, vianet. Classic tech. Nepal telecom,
Many people have experienced WiFi Slow when connecting to the Internet at home. It is customary to blame internet service providers as soon as Wi-Fi slows down.
But the Internet router, the router's settings, the router's location, etc. may also be slow.
Do a speed test
First, test your home internet speed - not over Wi-Fi, and directly on the router. Contact your service provider if your speed is less than what your service provider promised when doing a wire test. This problem is caused by the service provider
Speed test when connecting wires shows fast, but if Wi-Fi is slow, you need to change the router's settings and location, or the router itself.
The right place to put the router
It may sound strange, but the location of the router can also greatly affect the speed the router can provide.
In which place should a router not be installed?
- The router should never be placed around any other electrical device (such as a refrigerator, TV, microwave). Other electrical devices block the router's signal, causing the Internet to slow down.
- The router should not be placed under a corner, table and stand. The router's signal in the corner does not transmit properly and the Internet is slow.
- The router should not be restrained with a plastic bag or other item. Without good ventilation, the router's temperature rises and slows down.
What kind of router to put in place?
- The router should be kept open. To the extent possible, the router should be positioned so that it can be viewed directly from most locations in the home.
- Devices and routers such as refrigerator, TV, microwave and spacer should be at least 3-5 meters apart.
- If there is a large house, it is advisable to place the router in the middle of the floor.
Router settings
Most users use the router without having to change its settings. In most cases, it does not matter and the Internet works well. But in some cases the Internet may be slow due to this setting.
Hit 192.169.0.1 or 192.168.1.1 in the browser to open the router's setup page. Grab the username and password you need If unchanged, both the default username and password will be admin .
Router's channel
The router sends the Internet signal through some specified channels. Such interference will be less if you run your router from the nearest router to the least used channel. Download the app called WiFi Analyzer available on the Playstore, App Store and Windows 7 Store. This app will recommend the channel most suitable for the router in your area. Open the router's setup page and follow the recommended channels here.
Hit 192.169.0.1 or 192.168.1.1 in the browser to open the router's setup page. After you lose the required username and password, go to Wireless Settings of the router. At this point you will find the option to change the channel. Almost all of them are already auto-selected in that setting. Change this setting to the channel recommended by the WiFi Analyzer app instead of Auto and restart the router.
Router interval
Beacon Interval is a bit more complicated. On most routers, the result can be from 1 to 1000.
Hit 192.169.0.1 or 192.168.1.1 in the browser and open the router's setup page. After going to Advanced wireless settings, you will find the option called Beacon Interval. This setting may already have 100 ms. Make it about 500 and restart the router. Not good? Reduce or increase the beacon interval again and test again. Keep what works best. The beacon interval is a bit more complicated. For general household sponsorships it is advisable to keep 991. Having a small beacon interval reduces the battery of the mobile running WiFi. So it's best to keep a little more.
Channel width 20 MHz or 40 MHz?
New routers can work on two Channel Width - 20 MHz or 40 MHz Browser 192.169.0.1 or 192.168.1.1 after opening the router's setup page, there you can select Channel with 20 MHz or 40 MHz in wireless settings.
Range of 20 MHz is high but speed is low and interference is high. Speed is higher at 40 MHz and interference is low but range is also less. If the house is large and you have not used the repeater then it is advisable to use 20 MHz only. Repeater is used and 40 MHz is appropriate if WiFi is only used in small areas. It is not advisable to use 40 MHz in a large walled house and low open area.
DNS change
If internet browsing is slow, DNS can be changed for improvement. The change in DNS is almost certain to improve the internet speed. The most current and fastest-growing DNS 1.1.1.1. Go to the router's setup page and hit 1.1.1.1 on the DNS and restart the router.
Router protection
WiFi slows down even if the router is hacked. Someone else is stealing your Internet and may be slow. To protect the router, consider the following:
1. Go to the router's settings page and turn off the WPS option,
2. Keep password ali long and complicated
3. Always set the password in WPA2 mode
4. Filter the MAC if necessary .
Is the router very old?
The newer routers are much faster than the old ones and they have new features. Some older routers do not have to change the settings described above. For a better Internet experience, your router must be at least 802.11n or 802.11ac. Routers with 802.11b and 802.11g levels are outdated. So it's best not to use him.
After prolonged use, dust may also be frozen on the router. Clean up If you are buying a new router, buy as many as two antennas and have 802.11ac levels.
If the internet is slow enough to do so, contact the service provider.
 |
| Router |
But the Internet router, the router's settings, the router's location, etc. may also be slow.
Do a speed test
First, test your home internet speed - not over Wi-Fi, and directly on the router. Contact your service provider if your speed is less than what your service provider promised when doing a wire test. This problem is caused by the service provider
Speed test when connecting wires shows fast, but if Wi-Fi is slow, you need to change the router's settings and location, or the router itself.
The right place to put the router
It may sound strange, but the location of the router can also greatly affect the speed the router can provide.
In which place should a router not be installed?
- The router should never be placed around any other electrical device (such as a refrigerator, TV, microwave). Other electrical devices block the router's signal, causing the Internet to slow down.
- The router should not be placed under a corner, table and stand. The router's signal in the corner does not transmit properly and the Internet is slow.
- The router should not be restrained with a plastic bag or other item. Without good ventilation, the router's temperature rises and slows down.
What kind of router to put in place?
- The router should be kept open. To the extent possible, the router should be positioned so that it can be viewed directly from most locations in the home.
- Devices and routers such as refrigerator, TV, microwave and spacer should be at least 3-5 meters apart.
- If there is a large house, it is advisable to place the router in the middle of the floor.
Router settings
Most users use the router without having to change its settings. In most cases, it does not matter and the Internet works well. But in some cases the Internet may be slow due to this setting.
Hit 192.169.0.1 or 192.168.1.1 in the browser to open the router's setup page. Grab the username and password you need If unchanged, both the default username and password will be admin .
Router's channel
The router sends the Internet signal through some specified channels. Such interference will be less if you run your router from the nearest router to the least used channel. Download the app called WiFi Analyzer available on the Playstore, App Store and Windows 7 Store. This app will recommend the channel most suitable for the router in your area. Open the router's setup page and follow the recommended channels here.
Hit 192.169.0.1 or 192.168.1.1 in the browser to open the router's setup page. After you lose the required username and password, go to Wireless Settings of the router. At this point you will find the option to change the channel. Almost all of them are already auto-selected in that setting. Change this setting to the channel recommended by the WiFi Analyzer app instead of Auto and restart the router.
Router interval
Beacon Interval is a bit more complicated. On most routers, the result can be from 1 to 1000.
Hit 192.169.0.1 or 192.168.1.1 in the browser and open the router's setup page. After going to Advanced wireless settings, you will find the option called Beacon Interval. This setting may already have 100 ms. Make it about 500 and restart the router. Not good? Reduce or increase the beacon interval again and test again. Keep what works best. The beacon interval is a bit more complicated. For general household sponsorships it is advisable to keep 991. Having a small beacon interval reduces the battery of the mobile running WiFi. So it's best to keep a little more.
Channel width 20 MHz or 40 MHz?
New routers can work on two Channel Width - 20 MHz or 40 MHz Browser 192.169.0.1 or 192.168.1.1 after opening the router's setup page, there you can select Channel with 20 MHz or 40 MHz in wireless settings.
Range of 20 MHz is high but speed is low and interference is high. Speed is higher at 40 MHz and interference is low but range is also less. If the house is large and you have not used the repeater then it is advisable to use 20 MHz only. Repeater is used and 40 MHz is appropriate if WiFi is only used in small areas. It is not advisable to use 40 MHz in a large walled house and low open area.
DNS change
If internet browsing is slow, DNS can be changed for improvement. The change in DNS is almost certain to improve the internet speed. The most current and fastest-growing DNS 1.1.1.1. Go to the router's setup page and hit 1.1.1.1 on the DNS and restart the router.
Router protection
WiFi slows down even if the router is hacked. Someone else is stealing your Internet and may be slow. To protect the router, consider the following:
1. Go to the router's settings page and turn off the WPS option,
2. Keep password ali long and complicated
3. Always set the password in WPA2 mode
4. Filter the MAC if necessary .
Is the router very old?
The newer routers are much faster than the old ones and they have new features. Some older routers do not have to change the settings described above. For a better Internet experience, your router must be at least 802.11n or 802.11ac. Routers with 802.11b and 802.11g levels are outdated. So it's best not to use him.
After prolonged use, dust may also be frozen on the router. Clean up If you are buying a new router, buy as many as two antennas and have 802.11ac levels.
If the internet is slow enough to do so, contact the service provider.
COMMENTS